GPS safety mobile phone

This mobile phone represents the perfect combination of GSM and GPS technologies characterized by streamline fashionable

1.5 Related Requirements

Related requirements for the use of the phone

.. Never use the phone at too high and too low temperature.

.. In order to ensure call quality, try to avoid using the phone too close to common phone, TV set, radio, office automation, etc.

.. In order to keep accurate positioning, be sure to use the GPS function of this phone in an open place.

Related requirements for the use of the battery

.. The battery shall be placed in the cool, well-ventilated and direct sunshine-free place. If the battery is used up for long, it will be unable to be charged. If the phone is idle for long, please regularly charge it.

.. The battery is consumable. All the batteries have certain service life. When the battery is charged repeatedly but cannot improve its performance, it will indicate that the battery has been damaged and should be replaced.

.. Never throw the waste battery together with rubbish. When dealing with the waste battery, always abide by the regulations of the local competent authority.

 Charging requirements

.. Please do not charge your phone at such places: the sunshine can reach directly; the outer temperature is below 5°C or higher than 40; Humid and dusty places or vibrating places °C(might cause malfunction); near television, radio, or other electrical devices (might affect the image and sound of these devices).

2. Use Notices

2.1. Check the Phone and Accessories

Unpack the mobile phone package and check if the phone and its accessories are complete. In case of any incompletion, please consult the local distributor.

. 1X mobile phone;. 1 x battery; 1x charge;1x user manual;1x headset(optional);1x certificate of conformity.

2.2. Mobile Phone Specifications

2.2.1 Accessory Specifications

Lithium battery    Normal voltage

3.7V 1300MAH

Charging voltage

 4.2V

Charger

Input

AC220V(+/- 20%) 50Hz 50mA

Output

DC5.0V 500mA

Charging time

12h for the first three times and 3-6h thereafter.

2.2.2 Technical Specifications

Work frequency

850/900/1800/1900MHZ

Continuous call duration

About 5h

Continuous standby duration

7 days (GSM standby)

Dimensions

118mm*63mm*27mm

Weight

110g ( including battery)

 2.4 How to Insert the SIM Card

Please insert the SIM card along its SIM card slot direction (align the cut corner of the SIM card with the cut corner of the slot) and make sure that the SIM card has been inserted into its proper position.

2.5 Battery

2.5.1 Install the Battery

Open the battery cover, insert the SIM card properly, install the battery and then restore the battery cover.

2.5.2 Charge the Battery

About charging:

 1) Insert the charging plug of the charger into the charging port of the phone and the other end of the charger into the 220V power socket. In such case, the phone backlight will be lit up, the battery icon will flicker and “charging” will be displayed.

 Charging Charged

2) When the battery icon of the phone stops flickering, it will indicate that the charging is over and the screen will display “Charged”.

Charge with the phone on:

 1) Insert the charging plug of the charger into the charging port of the phone and the other end of the charger into the 220V power socket. In such case, the phone backlight will be lit up, the battery icon will flicker and the battery icon on the right of the screen will start flickering.

Tips:

.. For the battery of the newly bought mobile phone or the new replacing battery, do not charge it until it is completely used up. It is recommended to charge the battery for above 12h for the first three times in order to ensure the service life of the battery.

.. The charging with the phone on will not affect the normal call dial and reception, but consume more power than usual and thus it will take more time to charge the battery.

 3. Basic Operation

3.1 Switch-on/off

Switch-on

Press the [Switch-on Key] to switch on the phone and enter the standby interface.

Tips:

1. If the SIM protection is activated, you need to input SIM password, press the [Left Function Key] to confirm and enter the standby interface.

2. If the phone protection is activated, you need to input the phone password, press [Left Function Key] to confirm and enter the standby interface.

Switch off

On the standby interface, press the [Switch-off Key] to switch off the phone.

3.2 Standby Shortcut

Tips:

On every edit and function interface, press the [Switch-on Key] to directly back to the standby interface.

On the standby interface, press the [Left Function Key] to enter the main menu. On the main menu, press the [Up/Down Direction Key] to move and select the corresponding menus and then press the [Left Function Key] to enter the corresponding module.

On the standby interface, press the [Dial Key] to enter the list of the latest received/dialed calls.

On the standby interface, press the [Up Direction Key] to enter the interface of creating SMS.

On the standby interface, press the [Down Direction Key] to enter the alarm clock menu.

3.3. Keypad Lock

In order to avoid touching the keypad carelessly and thus causing wrong operation, you may lock the keypad of the phone.

In switch-on state, push the keypad lock switch downward to lock the keypad.

In the locked keypad state, push the keypad lock switch upward to unlock the keypad.

3.4. Adjust Receiver Volume

Press the left volume adjustment key to adjust the receiver volume. 3s after the volume is adjusted, the screen will automatically back to the call duration page.

3.5. Word Input

GPS safety monitoring mobile phone provides such input modes for you as intelligent Pinyin input, letter input, English input, number input and symbol input. The defaulted input mode is the intelligent Pinyin input mode. You may set input mode on the phone. Press the [# Key] to switch input modes and the input state will be displayed on the right upper corner of the screen.

The keypad definitions in the input mode are as follows:

[Enter Key]: Confirms the selected Pinyin, Chinese characters or symbols.

[Back Key]: Exits from the current input state.

[Up Direction Key], [Down Direction Key]: Moves the cursor up and down.

[* Key]: Inputs punctuations.

[# Key: Switches input modes.

[0 Key]~[9 Key]: Input digits.

4. Functional Description

4.1. Phonebook

The phonebook is used to store your phone numbers and it includes phone phonebook and SIM phonebook.

The phone phonebook can hold 200 entries while the SIM phonebook capacity depends on the actual SIM card.

Via Main Menu →Phonebook, or on the standby interface, press the [Left Direction Key] to enter the phonebook in a shortcut manner.

GPS safety mobile phone