CDMA800mhz mobile signal repeater/booster, High power RF amplifier for CMDA800

CDMA800mhz mobile signal repeater/booster, High power RF amplifier for CMDA800 Outdoor Antenna Siganal repeater Indoor Antenn

CDMA800mhz mobile signal repeater/booster, High power RF amplifier for CMDA800

Working system	CDMA	Model	ST-800
Frequency range	uplink:825-835MHz	Gain	Up link: Gp≥65dB
	Downlink: 870~880MHz		Downlink: Gp≥70dB
Output up	Up link 25dBm	Function	a) Power supply LED denote
	Downlink: 30dBm		b)Export power ELD denote
Port VSWR	≤1.8DB	I/O impedence	50Ω/N connector
Noise figure	≤8dB	Transmission delay	≤0.5μs
Power supply	AC/220V±10%   45~55Hz	Coverage area	800Sqm
Size	29*18*5cm	Net Weight	1.37KG

Basic Repeater System Installation

Your system should come with at least the following items:

1) Outdoor Antenna (goes outside the building)

2) Siganal repeater

3) Indoor Antenna (goes inside the building)!

4) Coaxial Communication Cables

5) Connetor

6)Power Splitter

Steps:

Step 1 Start by taking your phone up to the roof or other location outside to find where the signal is strongest.

Step 2  Temporarily mount the Outdoor (outside) antenna in that location. You may need to adjust and move the antenna later.

Step 3  Run coaxial cable into the building to a convenient loaction (attic, etc.) where you can also get standard power for the Signal Repeater.

Step 4  Place the Signal Repeater in that location and connect the coaxial cable to the Outdoor Side of the Signal Repeater and the Outdoor antenna.

Step 5  Mount your Indoor (inside) antenna in a productive location. You may need to adjust or move the antenna later.

Step 6  Connect coaxial cable between the Indoor antenna and the Signal Repeater output port.

Step 7   Power up the system and check for signal inside the building. If needed, tune system by moving and or pointing the Outdoor and Indoor antennas until they get the most signal possible.

Step 8  Secure all antennas and cables, securely mount the Signal repeater and clean up the installation.

Of course there are still a few more things to consider but in general, this is the basic procedure. For more information, please contact us.

 

CDMA800mhz mobile signal repeater/booster, High power RF amplifier for CMDA800