Portable Wifi Transmission Skypix Scanner

Portable Wifi Transmission Skypix Scanner Sensor: A4 color contact image sensor 900/600/300 dpi scan selection wifi function

Portable Wifi Transmission Skypix Scanner

Portable Wifi Transmission Skypix Scanner Key features

Color/mono scan selection

900/600/300 dpi scan selection

WIFI function

Direct save JPG/PDF file to micro SD/micro SDHC card

Supports micro SD/micro SDHC card up to 32GB

Color LCD Display

Driver free to download for Windows XP, Windows Vista, Windows 7 and Mac OS 10.4 or above

(direct plug-in, driver installation not required)

Key specifications of ST-44w

Image sensor	A4 Color Contact Image Sensor
Number of sensor	5136 dots(1st~5104 dots available)
Resolution	Low resolution : 300x300 dpi Middle resolution: 600x600 dpi High resolution: 900x900 dpi
Maximum scanning speed for A4 size document	High resolution with color≥12s; Hign resolution with mono≥10s Medium resolution with color≥8S ; medium resolution with mono ≥6S; Low resolution with color≥3S; Low resolution with mono≥2S;
Capacity (Based on 1GB micro SD card. Scan A4 size file, the quantity of scans varies depending on the content complexity)	900dpi color: 300pcs/JPG or PDF (Min.) 900dpi mono:320pcs/JPG or PDF (Min.) 600dpi color: 640pcs/JPG or PDF (Min.) 600dpi mono: 700pcs/JPG or PDF (Min.) 300dpi color: 1600pcs/JPG or PDF (Min.) 300dpi mono: 1800pcs/JPG or PDF (Min.)
Scan width	212mm
Scan length	300DPI:98"(max);600DPI: 45";(max);900DPI:35"(max)
File format	JPEG/PDF
LCD	Scanning status display
Auto Power Off	3 Minutes
USB Port	USB 2.0 high speed
External memory	Micro SD Card
Standard Battery	2XAA alkaline batteries

How to calibrate the scanner

Note: Perform calibration only when white balance needs adjustment

With the dry cleaning cloth provided, clean the scanning lens located on the bottom of the scanner.Turn on the scanner by pressing the [POWER] button. Place the scanner on the white area of the White Balance Calibration paper provided.Press and hold the UP button. While holding the UP button, press the [POWER] button and then release both buttons to enter into auto-calibration mode. SD symbol will flash and then stop. “GREEN” and “RED” LED light will turn on.Do not move the scanner. Wait until the “RED” LED turns off. “GREEN” LED will stay on.With only the “GREEN” LED light on, start scanning the white paper by sliding the scanner across the paper until the “GREEN” LED light turns off. (Slide the scanner backwards if necessary).Press and hold the [POWER] button to power off the scanner. Calibration is complete.

How to scan

Note: To scan, make sure your scanner is not connected to the computer. 

Turn on the scanner by pressing the [POWER/SCAN] button for 2 seconds.Hold the document firmly with one hand on a flat surface.Place the scanner on the edge of the paper approximately 5/8 to 3/4 of an inch onto the page to ensure the whole document can be scanner. Make sure to keep the scanning area in between the scanning width indicators marked on the side of the scanner.

Portable Wifi Transmission Skypix Scanner